Custom sight tapes for slider & single-pin sights.
Enter your bow specs and get an estimated printable tape — free, no sign-up. Always verify it at the range.
Free foreverDensity altitudePDF & label output
1
Your Bow
▾
My Setups
Distance unit
Arrow speed
Estimated arrow speed
282 fps
Sight setup
2
Advanced options Optional refinements
▾
Accessory speed corrections
Small adjustments to the estimated speed, optional.
Tape increment
Short yardage marks
Optional reference dots for close shots inside your zero.
Conditions Standard — sea level, 60 °F
Adjusted speed
–fps
Air density
–%
Density alt
–ft
Press alt
–ft
Import / export setups
Estimated starting tape using aerodynamic drag and sight geometry. Verify every important mark at the range before hunting.
🎯
Your sight tape will appear here
Fill in your bow settings on the left, then click Generate
Your Estimated Sight Tape
Speed– fps
Arrow– gr
Radius–"
Zero–yd
Range–yd
Scale check — measure this bar with a ruler. It should be exactly 1 inch. If not, re-print at 100% scale (no page scaling).
0"1"
This on-screen tape is a spacing preview only and is not printable. Use Download / print tape to calibrate your sight and create a physical-scale PDF or PNG.
Advertisement
Arrow speed (synced from your bow setup)
282fps
40yd
0°
0mph
Wind direction (clock position)
Dial to
40
yards
Wind drift
0.0"
no crosswind
Time of flight
0.43s
seconds
True drop at range–
Angle-adjusted drop–
Horizontal distance–
Effective fps (with altitude)–
Angle Correction Cut Chart
Dial these yardages when shooting uphill or downhill. Rifleman's Rule: dial to = LOS × cos(angle). Based on your current bow setup.
Values are dial-to yardages. Numbers in grey show yards saved vs. flat shot. Works equally for uphill and downhill shots.
Download / print tape
Your sight
1 of 3
Tell us how the tape is mounted. This only changes the physical spacing used for printing.
A normal millimetre ruler is enoughMeasure from zero in the direction your sight moves toward longer distances.
Measurement tool
DistancePosition from zero
Sight—
Mapping—
Printer scale check — verify after printing
This is separate from the sight calibration above.
Field-calibrated estimate. Print at Actual size / 100% and verify every required distance at the range before hunting.
✓
Your sight tape is downloaded
Want your bow setups and sight-tape tools on the range? Sight Tape Gen is now available for Android.